3D Printed Small Wall Shelf | Minimal Floating Display
✓ Standard shipping
3D Printed Small Wall Shelf | Minimal Floating Display - 4 inches (10 cm) is backordered and will ship as soon as it is back in stock.
Production usually takes 1–3 business days
Standard shipping is free where the destination is supported
Standard US delivery: generally 6–10 business days after dispatch
Priority delivery: generally 2–5 business days where available
Product-specific warranty terms apply
Size & Panel Information (Decals Only)
Size & Panel Information (Decals Only)
The meaning of the selected size depends on the product and variant. It may refer to the longest side, finished composition, sheet, panel, roll or individual element. Check the option label and product description before ordering.
Large decals may be supplied in aligned sections when required for production or safe packing. This applies only when stated for the selected product.
Need an exact finished width or height?
Contact Decords before ordering with the required dimensions and a link to the product.
Care information
Care information
Care and installation requirements depend on the material and intended surface. Follow the product description and the instructions supplied with the order.
Before application:
- Use a clean, dry, stable and fully cured surface.
- Follow the paint manufacturer’s curing time. Paint that feels dry may not be fully cured.
- Test a small, discreet area when surface compatibility is uncertain.
Installation and cleaning:
- Apply without stretching the material and smooth it gradually.
- Some products can be repositioned during installation. This does not mean they can be stored and reused later.
- Use a soft dry cloth, or a slightly damp cloth only when the product instructions allow it. Avoid abrasive tools and strong solvents.
Removal:
- Lift an edge and peel slowly at a low angle.
- Use moderate warmth only when the product instructions allow it.
- Stop if paint, wallpaper or the underlying finish begins to lift.
Residue-free or damage-free removal cannot be guaranteed for every material, paint system or surface condition.
Delivery and Shipping
Delivery and Shipping
Production usually takes 1–3 business days.
Standard shipping is free where the destination is supported. Available destinations, methods, prices and delivery estimates are shown at checkout.
Standard delivery to the United States is generally estimated at 6–10 business days after dispatch. Priority delivery is generally estimated at 2–5 business days where available.
Customs duties, import taxes or carrier charges may apply unless checkout or the product page explicitly states otherwise.
Guarantees & Returns
Guarantees & Returns
- Product-specific warranty
Eligible products may include a two-year commercial warranty where this is stated on the product page or warranty information. Coverage depends on the product, issue, installation, use and applicable conditions. - 90-day commercial returns
Eligible unused standard items may be returned within 90 days of delivery. Custom, personalized, sale and special-order products are normally excluded from change-of-mind returns unless required by law. - Lost parcel protection
If a tracked parcel is confirmed lost in transit, contact Decords so the appropriate replacement or other remedy can be arranged. - Standard shipping
Standard shipping is free where the destination is supported. Current options are shown at checkout.
Request return instructions before sending an item. Return shipping costs are the buyer’s responsibility unless the item is defective, incorrect or applicable law requires otherwise.
Approved refunds are issued to the original payment method after inspection where required. Bank or payment-provider processing times may vary. Statutory refund deadlines remain unaffected.
Secure checkout
Payments are processed by supported payment providers. Decords does not receive the customer’s full card details.
3D Printed Small Wall Shelf | Minimal Floating Display
Description
Description
This physical small wall shelf is 3D printed in PLA as a compact floating display ledge for lightweight decorative objects. Its simple rounded form is intended for small wall arrangements, desks, bedrooms, studios and display corners. It is not a digital STL file, structural shelving or a substitute for load-rated furniture.
Choose the longest-side size
The ten listed options describe the approximate longest exterior side of one shelf:
- 4 inches
- 5 inches
- 6 inches
- 7 inches
- 8 inches
- 9 inches
- 10 inches
- 11 inches
- 12 inches
- 13 inches
The usable top surface is smaller than the stated exterior size. Measure the intended object and wall space before ordering. Product photographs are presentation examples and do not establish the exact scale of every option.
Filament color
Select or specify the filament color through the color option shown on the product page. The shelf is printed in one solid material color and is not hand-painted. If an exact shade is important, review the available color chart and contact Decords before production. Lighting, screens and filament batches can affect the apparent color.
Mounting and load planning
Mounting screws, wall plugs and anchors are not included. Choose fasteners that are suitable for the wall material, the shelf’s mounting points and the intended load. Installation on drywall, masonry, timber, tile and other surfaces can require different hardware.
Because holding capacity depends on shelf size, wall condition, fasteners, installation and object placement, this listing does not state a universal load rating. Use the shelf only for lightweight, stable, non-valuable decor. Do not place heavy, fragile or irreplaceable items on it, and do not install it where a falling object could cause injury or damage.
Suitable display items
- Small crystals and lightweight ornaments
- Miniature figures and empty decorative containers
- Lightweight artificial plants
- Other dry display items that fit fully on the ledge
Do not use the shelf for lit candles, hot objects, open flame, food, liquids or items that overhang the ledge.
What is included
One 3D printed wall shelf in the selected size and color. Display objects, mounting hardware, wall preparation and installation service are not included.
3D printed finish and care
PLA is deposited layer by layer. Fine layer lines, seams and small surface variations are normal characteristics of 3D printing. Keep the shelf away from high heat, direct flame and prolonged intense sunlight. Dust gently with a soft dry cloth. Do not soak it or use solvents, abrasive cleaners or a dishwasher.
Frequently asked questions
Does the selected size describe the usable ledge?
No. It describes the approximate longest exterior side. The usable top area is smaller.
Are screws and anchors included?
No. Select mounting hardware for the wall material and intended lightweight load.
Can it hold a heavy plant or valuable object?
No universal load rating is provided. Use it only for lightweight, stable decorative items.
Where can I compare another shelf design?
Compare the 3D Printed Mushroom Wall Shelf, or browse all 3D printed decor and gifts.
Production and delivery
Decords normally produces orders in Estonia within 1–3 business days before dispatch. Free worldwide standard shipping is available.
See Decords in Action
Real projects, real production, and behind-the-scenes moments from our workshop.
STANDARD SHIPPING
Free where the destination is supported. Current options and delivery estimates are shown at checkout.
Frequently Asked Questions
Do you offer free shipping?
Do you offer free shipping?
Standard shipping is free where the destination is supported. Available destinations, methods, prices and delivery estimates are shown at checkout.
Production usually takes 1–3 business days. Standard delivery to the United States is generally estimated at 6–10 business days after dispatch. Customs duties or import taxes may apply unless checkout or the product page explicitly states otherwise.
How can I choose the best product for my space?
How can I choose the best product for my space?
Use the product type, dimensions, material details and intended surface to compare options. For an uncertain surface or a custom project, contact Decords with measurements and a clear photograph before ordering.
Can I order a personalized design?
Can I order a personalized design?
Yes. Custom requests are reviewed individually. Send the required dimensions, quantity, intended use, delivery country and the largest original artwork file available. The customer must have the right to reproduce all submitted content.
How do I return a product?
How do I return a product?
Contact Decords before sending anything and include the order number. Eligible unused standard items may be returned within 90 days of delivery. Custom, personalized, sale and special-order products are normally excluded from change-of-mind returns unless required by law.
Request the correct return instructions and address. Return shipping is the buyer’s responsibility unless the item is defective, incorrect or applicable law requires otherwise.
What warranty is included?
What warranty is included?
Eligible products may include a two-year commercial warranty where this is stated on the product page or warranty information. Coverage depends on the product, issue, installation, use and applicable conditions. Mandatory consumer rights remain unaffected.
How long will it take to receive my refund?
How long will it take to receive my refund?
After an approved return is received and inspected where required, the refund is issued to the original payment method. The time needed for it to appear depends on the bank or payment provider. Mandatory statutory deadlines remain unaffected.
How is the selected product size measured?
How is the selected product size measured?
The meaning of a selected size depends on the product and variant. It may refer to the longest side, finished composition, sheet, panel, roll or individual element. Check the option label and product description before ordering. Contact Decords when an exact finished width or height is required.
Do you offer priority shipping?
Do you offer priority shipping?
Priority shipping is available for eligible destinations and is generally estimated at 2–5 business days after dispatch. Current services, prices and destination-specific estimates are shown at checkout.
What payment methods are accepted?
What payment methods are accepted?
Available payment methods are displayed during checkout and can vary by country, currency and device. Payments are processed by supported payment providers.
